A practical engineering guide to planning waterproofing for foundations, retaining walls, terraces, balconies and wet areas.
Waterproofing Guide: Proper Planning for Foundations, Terraces and Wet Areas
Waterproofing is not merely a finishing detail. It directly affects the durability of the structural system, indoor comfort and long term maintenance costs. When building elements remain exposed to water or persistent moisture, problems such as coating failures, mould, blistering, reinforcement corrosion and gradual loss of durability may occur.
Turkey's Regulation on Waterproofing in Buildings covers waterproofing principles for foundations, floors and basement walls in contact with soil, as well as roofs, balconies and wet areas in new buildings. Its stated purpose is to reduce risks associated with corrosion, durability loss and use conditions caused by water and moisture exposure.
In coastal areas such as Foça and İzmir, the subject deserves additional attention. Marine humidity, wind driven rain, salt exposure and seasonal temperature changes can make small construction defects more visible over time. Waterproofing should therefore be designed as part of the building system from the project stage rather than treated as a product applied after construction.
How moisture and water damage buildings
Water does not enter a building only through rainfall. Ground moisture rising by capillary action, groundwater, plumbing leaks, condensation and standing rainwater can all create different damage mechanisms.
- Ground moisture and groundwater may affect elements in direct contact with soil.
- Cracks, construction joints and service penetrations can become paths for water movement.
- Moisture and oxygen reaching reinforcement can accelerate corrosion under suitable conditions.
- Capillary moisture may cause blistering, salt deposits and paint deterioration.
- High indoor humidity can lead to mould, odour and comfort problems.
For this reason, simply sealing the visible leak is often not a permanent solution. The source of the water, the pressure involved and the path it follows through the building assembly should first be identified.
Waterproofing foundations and retaining walls
Foundations and soil retaining walls are among the building elements that are most difficult to repair later. A waterproofing defect behind a completed basement wall may require excavation and removal of landscaping. Foundation waterproofing should therefore be integrated into the normal design and construction sequence.
Ground conditions and groundwater level
The first step is understanding the water conditions around the building. The geotechnical report, groundwater level, surface drainage, site slope and the path of stormwater across the plot should be considered together. Using the same foundation detail for every site is not sound engineering practice.
Continuity between horizontal and vertical layers
The waterproofing layer beneath or around the foundation must connect continuously with the wall waterproofing. Foundation to wall junctions, expansion joints, pipe penetrations and corners at foundation level deserve particular attention.
Drainage and protection
Drainage and waterproofing are not alternatives to one another. Drainage reduces the water load acting on the wall, while the waterproofing layer separates the structural element from moisture. After installation, the waterproofing layer should be protected against damage during backfilling.
Turkey's General Technical Specification for Construction Works emphasises system continuity and compliance with relevant waterproofing regulations. It also requires materials to be stored and applied according to their technical data sheets and environmental requirements.
Why terrace and balcony details matter
A significant proportion of terrace and balcony leaks are caused not only by material failure but by incorrect falls, drains, thresholds and wall junctions.
Falls must be designed first
Rainwater should not remain on the surface. Screeds and finishes should direct water towards drains or planned discharge points. A waterproofing membrane should not be expected to compensate for an incorrectly formed slope.
Drain connections
Drains are critical details. The waterproofing layer should connect securely to the drainage element so that water reaching the membrane level can be discharged safely.
Official Turkish technical specifications state that roof waterproofing should maintain continuity around gutters, valleys, drains, chimneys and ventilation elements.
Walls and door thresholds
Waterproofing should not stop at the horizontal surface. It should turn up at parapets and adjacent walls to an appropriate level, while door thresholds should be coordinated with the architectural detail. Inadequate level differences between exterior paving and interior floors increase the risk of water entering during heavy rain.
Bathrooms, kitchens and other wet areas
Ceramic tile is not a waterproofing system by itself. Grout, adhesive and surface finishes can allow moisture to migrate over time. The true waterproofing layer should form a continuous system beneath the finish.
- Shower floors and relevant wall surfaces should receive continuous waterproofing.
- Floor to wall junctions should be reinforced with suitable system components.
- Drains must be fully integrated into the waterproofing system.
- Pipe penetrations should not be left untreated.
- Where practical, the system should be tested before tiling.
Kitchens are exposed to less continuous water than showers, but sink connections, dishwasher and washing machine points and concealed plumbing can still create leakage risks. In multi storey buildings, a relatively small leak can cause extensive damage below.
How waterproofing relates to villas and stone houses
Villa projects often combine basements, roof terraces, balconies, pool areas, landscaped ground and multiple changes in level. Waterproofing should therefore be coordinated with the architectural, structural and landscape design.
In the Foça and İzmir region, site slope, proximity to the sea, prevailing winds and the effect of intense rainfall on site drainage should all be assessed. For the wider planning context, see our article Villa Project in Foça: Site Selection, Orientation, Materials and Quality of Life.
Stone buildings require a different level of care. Trying to solve every moisture problem by creating a completely impermeable skin is not always appropriate. The stone, mortar, capillary moisture, foundation drainage and vapour movement should be studied as one assembly. See also Stone House and Architecture: The Foça Approach. Atlasya's existing stone house guide also highlights the relationship between foundation drainage, capillary moisture and insulation detailing.
Waterproofing should also be coordinated with thermal insulation. A persistently damp construction layer can perform poorly from both a thermal and comfort perspective. For related topics such as thermal bridges, condensation and insulation layers, see our thermal insulation and energy efficiency articles.
How should waterproofing materials be selected?
No single material is ideal for every part of a building. Selection depends on the substrate, water pressure, expected movement, UV exposure, finish and accessibility for future maintenance.
Bituminous membranes
Bituminous membranes are widely used on foundations, retaining walls, terraces and roofs. Substrate preparation, overlap widths, corners and protection layers strongly influence performance.
TSE certification listings include waterproofing sheets assessed under standards such as TS EN 13969 for below ground applications and TS EN 13707 for reinforced bituminous roof sheets. This illustrates why material selection should consider the applicable product standard and declared performance, not only the commercial product name.
Liquid applied systems
Liquid applied waterproofing can be useful on complex geometries, wet areas, balconies and surfaces with numerous penetrations. Correct dry film thickness, waiting times between coats and substrate moisture remain essential.
Cementitious systems
Cement based products can be compatible with concrete and mineral surfaces and are commonly used in foundations, wet areas and certain water retaining structures. Rigid and flexible variants exist, so crack movement and service conditions should be considered.
Synthetic membranes
PVC, TPO and similar sheet systems may be suitable for selected roof and specialised applications. Welded joints, mechanical fixing and penetration details are central to their performance.
Recommended application sequence
- Identify the water and moisture exposure affecting the building element.
- Define the waterproofing system in the project details.
- Check substrate strength, cleanliness, moisture and flatness.
- Prepare corners, joints, drains and service penetrations.
- Apply primer where required by the selected system.
- Install the main waterproofing layer at the specified thickness and overlaps.
- Inspect all critical junctions.
- Carry out a flood or watertightness test where appropriate.
- Protect the waterproofing layer.
- Complete finishes or backfill without damaging the system.
What should be checked during site inspection?
Because waterproofing is usually hidden by later construction layers, documenting the work before it is covered is important.
- Photograph the substrate before application.
- Record the product data sheet and batch information.
- Check ambient conditions and application temperature.
- Verify overlap dimensions and number of coats or layers.
- Photograph drains, thresholds, parapets and pipe penetrations separately.
- Carry out a final inspection before applying protection layers.
Construction materials and building inspection in Turkey are regulated under a broader legal framework. Rules also exist for authorised laboratories conducting construction material and soil testing under Law No. 4708 on Building Inspection.
Recent amendments relating to building inspection and the Construction Products Regulation were published in the Official Gazette in 2025 and 2026. Project teams should therefore work with the currently applicable legislation rather than relying solely on older practice.
Atlasya İnşaat approach
At Atlasya İnşaat, waterproofing is treated not as a single product decision but as an engineering system involving the ground, structure, architectural detailing, drainage, finishes and use conditions.
For villas, bespoke buildings and stone houses in Foça and İzmir, resolving water related details from foundation level through to terraces during the design phase is usually the most reliable way to avoid costly repairs later.
For a technical preliminary assessment or waterproofing planning for your project, you can contact Atlasya İnşaat.
Frequently Asked Questions
Can foundation waterproofing be applied after the concrete is poured?
Yes, depending on the selected system. Some systems are installed below the foundation before casting, while others are applied to the completed foundation and wall surfaces. The key requirement is continuity between horizontal and vertical waterproofing layers.
Is ceramic tile sufficient waterproofing for a bathroom?
No. Tiles and grout form a water resistant finish but should not be considered the primary waterproofing layer. A continuous waterproofing system should be installed beneath the finish.
If a terrace leaks, is replacing the grout enough?
Only if the defect is limited to the surface joint. If the fall, drain, membrane or parapet connection is defective, new grout will not provide a lasting solution. The source of the leakage should be identified first.
Is waterproofing still required if there is foundation drainage?
Yes. Drainage reduces the water load around the building, but it does not replace waterproofing. Both systems should work together.
Related Content
- Villa Project in Foça: Site Selection, Orientation, Materials and Quality of Life
- Stone House and Architecture: The Foça Approach
- Thermal Insulation and Other Technical Guides
- Thermal Insulation and External Cladding Planning Guide
- Villa construction services
- Stone house services
- Projects


